For demanding high-strength bonds
A high-grab Fix All construction adhesive for demanding mounting work where strong initial tack helps hold compatible materials in place.
Fix All X-Treme Power is positioned for heavier mounting and vertical assembly where strong initial tack reduces movement after pressing compatible parts together.
Follow the initial-tack, cure and loading guidance on this page, with temporary support whenever the component size, weight or site conditions require it.
These examples show typical tasks and application methods. The product guidance below covers surface preparation and application.
Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.
Make sure surfaces are sound, clean and free from dust, grease, release agents and loose material.
For bonding, apply beads or dots with enough ventilation between them for moisture curing; press the parts together firmly and support them when the job requires it.
For sealing, size and prepare the joint correctly, apply a continuous bead and tool it before a skin forms.
Check the product’s technical data sheet for application temperature, working time, cure time, primer and loading guidance.
Find the current technical and safety information available for this product, along with relevant test or approval documents.
Safety data sheets are market-specific. Australian editions provide regional product information. Request the current Singapore SDS or any document not listed here from PFE Technologies.
These practical points help you achieve a reliable result.
The most versatile local Fix All variant: an elastic hybrid-polymer adhesive and sealant for building, sanitary and movement-accommodating applications on many common materials.
A crystal-clear, elastic Fix All adhesive and sealant for discreet interior and exterior bonding and sealing on compatible materials, including suitable damp substrates.
A fast-strength-building Fix All adhesive for jobs that need early handling strength. It is hand-tight after about 20 minutes under the conditions in its technical data sheet and continues building strength as it cures.
Product selection help
Tell the local team what you are joining or sealing, the size of the job and where it will be used. Add photographs and any project requirements that matter.
