Flexible

Fix All SMX hybrid polymer

Flexible bonding and sealing

Fix All Flexi

Name: Fix All Flexi
Brand: Soudal

The most versatile local Fix All variant: an elastic hybrid-polymer adhesive and sealant for building, sanitary and movement-accommodating applications on many common materials.

Ask about this product

Product description

The general-purpose Fix All

Flexi combines elastic sealing with strong bonding, making it the starting point for many building, sanitary, floor-joint and vibration-prone applications.

Key characteristics

Very good adhesion on many materials, including suitable slightly moist substrates
Permanent elasticity after cure
Low odour, very low emissions and mould-resistant sanitary formulation
UV and ageing resistance, water-based overpainting and suitability for natural stone

Material guidance

PE, PP, PTFE, bituminous materials, copper-containing metals and stressed PMMA or polycarbonate need specialist preparation or a different product. Follow the preparation guidance for water-loaded joints and test compatibility on unfamiliar materials.

Key benefits

Remains flexible after curing
Combines bonding and sealing
A practical choice for Singapore indoor and outdoor conditions

Application gallerySee the product in use.

These examples show typical tasks and application methods. The product guidance below covers surface preparation and application.

Using Fix All Flexi for an elastic sanitary sealing detail.

A prepared sealing detail exposed to water after cure.

Fix All Flexi applied during an exterior stone installation.

A controlled bead of Fix All Flexi beneath exterior stone paving.

Preparation and applicationFollow the product instructions step by step.

Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.

01
Make sure surfaces are sound, clean and free from dust, grease, release agents and loose material.
02
For bonding, apply beads or dots with enough ventilation between them for moisture curing; press the parts together firmly and support them when the job requires it.
03
For sealing, size and prepare the joint correctly, apply a continuous bead and tool it before a skin forms.
04
Check the product’s technical data sheet for application temperature, working time, cure time, primer and loading guidance.

Product videosSee how the product is used.

Product documentsTechnical and safety documents.

Find the current technical and safety information available for this product, along with relevant test or approval documents.

PDF Official — Current technical data sheet Open document → PDF Official — Current declaration of performance Open document → PDF Official — Current safety data sheet — Australia edition Open document → PDF Official — Current VOC statement — Australia edition Open document →

Safety data sheets are market-specific. Australian editions provide regional product information. Request the current Singapore SDS or any document not listed here from PFE Technologies.

Additional resourcesProduct guides and technical material.

Catalogue Fix All Flexi catalogue Open PDF →

For the best resultMatch the product to the materials and application.

These practical points help you achieve a reliable result.

Explore this product on Soudal Global →

Choose the Fix All variant that best matches the materials, movement, finish and exposure.
PE, PP and PTFE need a specialist product or surface treatment; plastics, coatings, bituminous materials and natural stone may need variant-specific preparation.
For standing water or continuous immersion, choose a product or system designed for that exposure.
Before starting, read the current technical and safety information for the product.
If the materials, coatings or site conditions are unfamiliar, test adhesion and compatibility on a prepared area first.

Related productsMore Fix All products.

Explore the category →

Fix All

Not sure whether this product fits the job?

Tell the local team what you are joining or sealing, the size of the job and where it will be used. Add photographs and any project requirements that matter.

Contact PFE Technologies WhatsApp