Soudal Singapore product
A rapid-setting cementitious mortar for stopping active water leaks and repairing suitable concrete, masonry and stone, including the finishing layer in the Soudapack WST penetration detail.
Mix Soudaplug ST with clean water to form a fast-setting mortar for active leaks, cracks, honeycombing and repair work in suitable concrete, masonry or stone.
The mortar sets within a few minutes. Prepare the opening and materials before mixing, follow the water ratio precisely and use it as the finishing layer with Soudapack WST where that system detail is specified.
Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.
Confirm that a rapid-setting hydraulic mortar suits the leak, substrate and water pressure, and provide a route for the water while you work.
Cut or rake the crack, hole or joint back to sound material and remove loose concrete, dust and laitance.
Mix only the quantity you can place within the very short working time, using clean water at the stated powder-to-water ratio.
Press the stiffening mortar firmly into the opening and hold it in place until it has set and the flow has stopped.
Once the plug has set, complete the surrounding detail with the waterproofing or finishing products specified for the structure.
Find the current technical and safety information available for this product, along with relevant test or approval documents.
Contact the Singapore team for the correct technical, safety or supporting document for this product.
These practical points help you achieve a reliable result.
A flexible polyurethane sealant that swells in contact with water. It is used in water- and gas-tight pipe, cable and concrete-joint details that provide the required confinement.
A single-component, solvent-free hybrid-polymer coating for waterproofing prepared roofs, gutters, penetrations, cracks and joints. It is intended for protected applications within its stated UV and water-exposure limits.
A non-hardening, water-swelling paste for sealing the inside of pipe and cable penetrations. Use it with the required backing and Soudaplug ST finishing detail.
Product selection help
Tell the local team what you are joining or sealing, the size of the job and where it will be used. Add photographs and any project requirements that matter.
