Soudal Singapore product
A crystal-clear, elastic SMX hybrid-polymer repair adhesive for compatible rigid and flexible materials indoors and outdoors.
Ultra Repair Adhesive bonds many compatible building and repair materials while remaining elastic after cure. Its clear formula is useful where the bond line should be unobtrusive.
Fit materials closely and make sure they are clean, dry and grease-free. Choose a different product for PE, PP, PMMA, nylon, PTFE, bituminous materials or copper-containing metals. Clamp for the stated period and allow the bond to cure before loading.
Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.
Check that both materials suit the product and follow its curing requirements.
Make surfaces sound, clean and free from dust, oil, grease and release agents; abrade or prime only as recommended for the selected product.
Apply the recommended bead, dot or coverage pattern, join the parts within the working time, press firmly and support them where necessary.
Allow the full cure time stated for the site conditions before loading or exposing the bond.
Find the current technical and safety information available for this product, along with relevant test or approval documents.
Safety data sheets are market-specific. Australian editions provide regional product information. Request the current Singapore SDS or any document not listed here from PFE Technologies.
These practical points help you achieve a reliable result.
A hybrid-polymer adhesive and sealant supplied in 600 ml foil packs for elastic bonding and sealing on compatible construction materials.
A one-component polyurethane timber adhesive with a foaming action and a D4 water-resistance classification under EN 204 when applied according to its technical data sheet.
A ready-to-use polyurethane adhesive foam for efficient bonding of compatible insulation panels, plasterboard and non-load-bearing interior blocks without mixing powder mortar.
Product selection help
Tell the local team what you are joining or sealing, the size of the job and where it will be used. Add photographs and any project requirements that matter.
