Soudal Singapore product
A hard-setting sodium-silicate paste designed for static interior joints and openings exposed to high temperatures.
Static interior joints and openings in suitable stoves, ovens, fireplaces, flues and heating equipment.
Firecement HT cures to a rigid seal and is documented for temperatures up to 1500°C. It is designed for static, dry details rather than flexible movement joints or areas with standing water.
Preparation and application
Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.
Confirm that the sealant, joint movement capability and evidence are suitable for the proposed joint and exposure.
Remove dust, grease, laitance, old sealant and loose coatings. Use the recommended primer or surface treatment where required.
Use a suitable backing material where required, apply a continuous bead without trapping air and tool the joint before skin formation.
Protect the joint from movement, water and contamination until it has cured sufficiently for service.
Product documents
Find the current technical, safety and supporting documents available for this product.
Safety data sheets are market-specific. Australian editions provide regional product information. Request the current Singapore SDS or any document not listed here from PFE Technologies.
For the best result
These practical points help you achieve a reliable result.
Related products
A low-modulus neutral-cure sanitary silicone for high-humidity joints, glazing and compatible building materials. It contains a fungicidal additive and is not paintable.
A neutral-cure silicone developed for cleanrooms, laboratories, industrial kitchens, food-processing spaces and other critical interiors where the specified test evidence is required.
An elastic silicone adhesive-sealant formulated for all-glass aquarium, terrarium and glass-construction work, with joint dimensions and curing planned before filling.
Product selection help
Send the local team the materials, joint or bond dimensions, exposure, project requirements and photographs where helpful.
