Soudal Singapore product
A low-modulus neutral-cure sanitary silicone for high-humidity joints, glazing and compatible building materials. It contains a fungicidal additive and is not paintable.
Sanitary, glazing and building joints exposed to high humidity, including bathrooms, kitchens, cold stores, containers and air-conditioning details.
Silirub 2S is a neutral, low-modulus, mould-resistant silicone supplied as a non-paintable finish and designed for substrates other than natural stone. For food-contact applications, follow the relevant certificate for the intended joint and exposure.
These examples show typical tasks and application methods. The product guidance below covers surface preparation and application.
Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.
Before starting, check that the sealant suits the joint movement and exposure and that you have any supporting report the project requires.
Remove dust, grease, laitance, old sealant and loose coatings. Use the recommended primer or surface treatment where required.
Use a suitable backing material where required, apply a continuous bead without trapping air and tool the joint before skin formation.
Protect the joint from movement, water and contamination until it has cured sufficiently for service.
Find the current technical and safety information available for this product, along with relevant test or approval documents.
Safety data sheets are market-specific. Australian editions provide regional product information. Request the current Singapore SDS or any document not listed here from PFE Technologies.
These practical points help you achieve a reliable result.
A neutral-cure silicone for cleanrooms, laboratories, industrial kitchens, food-processing spaces and other critical interiors where the project requires supporting test reports.
An elastic silicone adhesive-sealant formulated for all-glass aquarium, terrarium and glass-construction work, with joint dimensions and curing planned before filling.
An acetoxy silicone gasket sealant for suitable metal components in engines, pumps and heating equipment. It remains elastic after cure and is rated for service temperatures up to 285°C.
Product selection help
Tell the local team what you are joining or sealing, the size of the job and where it will be used. Add photographs and any project requirements that matter.
