Soudal Singapore product
An acetoxy silicone gasket sealant for suitable metal components, engines, pumps and heating equipment, remaining elastic after cure and resisting documented service temperatures up to 285°C.
Forming elastic gasket and sealing rings between suitable metal components in engines, pumps and heating installations.
Service temperatures range from -60°C to +285°C, with resistance to fuels, oils and grease. For the best result, match it to the actual metal, fluid and operating cycle; PE, PP, PTFE and bituminous substrates require a different product.
Preparation and application
Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.
Confirm that the sealant, joint movement capability and evidence are suitable for the proposed joint and exposure.
Remove dust, grease, laitance, old sealant and loose coatings. Use the recommended primer or surface treatment where required.
Use a suitable backing material where required, apply a continuous bead without trapping air and tool the joint before skin formation.
Protect the joint from movement, water and contamination until it has cured sufficiently for service.
Product documents
Find the current technical, safety and supporting documents available for this product.
Safety data sheets are market-specific. Australian editions provide regional product information. Request the current Singapore SDS or any document not listed here from PFE Technologies.
For the best result
These practical points help you achieve a reliable result.
Related products
A low-modulus neutral-cure sanitary silicone for high-humidity joints, glazing and compatible building materials. It contains a fungicidal additive and is not paintable.
A neutral-cure silicone developed for cleanrooms, laboratories, industrial kitchens, food-processing spaces and other critical interiors where the specified test evidence is required.
An elastic silicone adhesive-sealant formulated for all-glass aquarium, terrarium and glass-construction work, with joint dimensions and curing planned before filling.
Product selection help
Send the local team the materials, joint or bond dimensions, exposure, project requirements and photographs where helpful.
