Adhesives Polyurethane

Soudal Singapore product

Pro 40P

Name: Pro 40P
Brand: Soudal

A one-component polyurethane timber adhesive with a foaming action and a D4 water-resistance classification under EN 204 when applied according to its technical data sheet.

Ask about this product

Product description

Features

Easy application with newly redesigned bottle cap applicator
Easy to tool
Professional quality
Powerful bond
Foaming penetration action to fill bond cavities
D4 water resistance (DIN EN 204)
Suitable for wet wood types

Applications

Interior applications which are exposed to high relative humidity
Exterior applications which are exposed to direct weather influence
Bonding of windows and door frames (also corner connections) which need to meet class D4 according to EN204
Bonding of wooden construction elements

Application Method

Method: Apply the adhesive by means of a brush or notched trowel to one of the substrates. Join the parts together within 15 minutes and clamp for at least 3 hours. Pressing the materials during curing is necessary to reach the highest possible end strength.

Suitable Substrates

Various porous and non-porous surfaces such as wood, concrete, stone, and other materials commonly used in construction. For PE and PP, choose a specialist product or surface treatment. As the adhesive cures on exposure to moisture in the air or the material, a light spray of water to moisten the surface can accelerate the bonding process and filling character.

Application gallerySee the product in use.

These examples show typical tasks and application methods. The product guidance below covers surface preparation and application.

Applying controlled adhesive beads before assembling timber components.

Pro 40P polyurethane wood adhesive before application.

Applying Pro 40P polyurethane adhesive to timber.

Preparation and applicationFollow the product instructions step by step.

Use the guidance and documents for your chosen product. Contact us if the English TDS or SDS you need is not listed below.

01
Check that both materials suit the product and follow its curing requirements.
02
Make surfaces sound, clean and free from dust, oil, grease and release agents; abrade or prime only as recommended for the selected product.
03
Apply the recommended bead, dot or coverage pattern, join the parts within the working time, press firmly and support them where necessary.
04
Allow the full cure time stated for the site conditions before loading or exposing the bond.

Product documentsTechnical and safety documents.

Find the current technical and safety information available for this product, along with relevant test or approval documents.

PDF Official — Current technical data sheet Open document →

Safety data sheets are market-specific. Australian editions provide regional product information. Request the current Singapore SDS or any document not listed here from PFE Technologies.

For the best resultMatch the product to the materials and application.

These practical points help you achieve a reliable result.

Explore this product on Soudal Global →

A strong bond depends on sound materials, careful preparation, the right amount and shape of adhesive and suitable curing conditions.
For structural work, use the adhesive as part of a fixing design for the actual materials and load.
Before starting, read the current technical and safety information for the product.
If the materials, coatings or site conditions are unfamiliar, test adhesion and compatibility on a prepared area first.

Related productsMore Adhesives products.

Explore the category →

Adhesives

Not sure whether this product fits the job?

Tell the local team what you are joining or sealing, the size of the job and where it will be used. Add photographs and any project requirements that matter.

Contact PFE Technologies WhatsApp