Products by application
The right adhesive depends on what you are bonding, how much weight it must hold, whether the joint moves, where it will be used and how quickly strength is needed.
Product selection
Choose Fix All for flexible, clear, fast-curing or high-grab work. More specialised jobs may need a polyurethane adhesive, hybrid adhesive or chemical anchor.
For load-bearing work, use a fixing system designed for the load and combine the adhesive with mechanical fixings where the design calls for them.
Products available in Singapore
See each product page for uses, preparation guidance and current technical documents.
The most versatile local Fix All variant: an elastic hybrid-polymer adhesive and sealant for building, sanitary and movement-accommodating applications on many common materials.
A crystal-clear, elastic Fix All adhesive and sealant for discreet interior and exterior bonding and sealing on compatible materials, including suitable damp substrates.
A fast-strength-building Fix All adhesive for jobs that need early handling strength. It is hand-tight after about 20 minutes under documented conditions and continues building strength through the stated cure period.
A high-grab Fix All construction adhesive for demanding mounting work where strong initial tack helps hold compatible materials in place.
A high-grab Fix All construction adhesive that combines at least 400 kg/m² initial tack with very fast strength build-up and a hand-tight bond after 30 minutes under documented conditions.
A crystal-clear, elastic SMX hybrid-polymer repair adhesive for compatible rigid and flexible materials indoors and outdoors.
A hybrid-polymer adhesive and sealant supplied in 600 ml foil packs for elastic bonding and sealing on compatible construction materials.
A one-component polyurethane timber adhesive with a foaming penetration action and D4 water-resistance classification under EN 204 when used as documented.
A ready-to-use polyurethane adhesive foam for efficient bonding of compatible insulation panels, plasterboard and non-load-bearing interior blocks without mixing powder mortar.
A two-component, styrene-free anchoring resin for threaded rods, studs and reinforcing bars in suitable solid or hollow mineral substrates. Loads depend on the base material, hole geometry, installation and applicable design evidence.
Need help choosing?
Send us the materials, dimensions, exposure and any required performance standard. Photographs are helpful too.
Contact the local team
